Safety MGO Board with Galss Fiber for The Definitive Solution

Product Description

Product Description

Zhangjiagnag Shenggang environmental fireproof constructition material,co.Ltd. Zhangjiagang bomei fireproof manufacture factory established in 1998 with advantages geraphy lacation ,whose mother is Sheng gang Group. Our coperation covers an area of 68,000 square meters .we adopt the advances manufactureing equimpments,crafts,and inspection methords than rivals in this industry abord or home .Various of fireproof prevention boards and celing boards are the green products,idea for interior or outdoor decoration.we have 15years experience in building in kind,the product variety is complete ,the performance is stable.

Product Specification

Test items	Detection value	Test standard/Description
Fireproof characteristic	A grade non combustible	GB8624
Density	0.96g/cm3	GB/T7019-1997
Intensity of bending resistance when dry	18Mpa	GB/T719-1997
Intensity of bending resistance in moisture-saturated condition	22Mpa	GB/T719-1997
The rate of deformation when pick up the moisture	0.26%	GA160-1997
The shrinking rate when heated	1.0%	GA160-1997
Water permeability	No drop of water to emerge on the back	CNS 13778
Impact resistance	No crack,strip and run through	CNS 13778
Thermal resistance	1.14m2k/w	GB/T13475-92
Sound insulation	≥44dB	GBJ121-88
Security	100% free of asbestos, formaldehyde,and benzene
Radioactivity	No limited by the scope of application	GB6566-2001

 

SHENGGANG BOARD is a definitive solution for the most demanding steel
frame construction,prefab house,container house.It is more flexible than cement board.

SHENGGANG MGO FLOOR BOARD is an engineered "fit for purpose" fibre reinforced Magnesium Oxide flooring board substrate.It is lightweight and cheaper than cement board.The bending strength is better than cement board.
 

SHENGGANG MGO FLOOR BOARD is mold,mildew,fire,and water resistant without the addition of chemicals.It is eco non toxic than the same thickness fiber cement board

 

product benifits

Fire Resistance limit of fireproof MgO board:

3mm thickness can reach the request of fireproof.

9mm shenggang MgO board could be applied for >= 120mins fireproof lightweight partition wall;

12mm shegngang MgO board could be applied for >= 180mins fireproof lightweight partition wall.

The data is for reference only. Please contact us for more details on fireproof MgO board in different specifications.

 

Features of magnesium oxid board:

1. Normal MgO board: one smooth, one rough surface;

2. Pasted with wall paper;

3. Coated with latex paint;

4. Glued with ceramic tile;

5. With a design of wood or water or other grain.

Product application

Advantages of SG MgO wall board for exterior and interior wall 

1. High fireproof: 1- 4hours

2. Easy use: can be nailed, screw, cut, sawed and jointed easily

3. Eco: 100% no harm to human body

4. Good physical performance: small changing size by the big temperature changing.

5. Insects proof

6. Good thermal insulation, please refer to data in the table above.

7. Good paiting performance

8. Can be painted, laminated and be used as fireproof layer.

9. The rough side is easily for ceramic

Installation (Flooring, Wall and Ceiling)

Cut MgO with a carbide tipped scoring knife or a power saw equipped with a carbide blade. For best results, use a blade designed specifically for cement board and use a T-square to help ensure cuts are straight and even.

For circular cuts and irregular angle cuts use a Roto Zip, Dremel, or equivalent tool, equipped with a cement board bit or carbide tipped bit.

Start with proper framing and ensure studs are straight and square to allow for adequate fastening surface at adjoining walls and flat stress-free installation of MgO. Ensure framing is level.

The fewer cuts that are made the better and easier installation will be. Begin by laying out your floor before fastening to the joists. When planning the layout make sure the cut edges will be against the perimeter of the room. Sheets should be spaced evenly and butt tightly.

Install MgO on 16" centers. Always support board ends by joists. Slightly countersink each fastener. Leave about 1/8th inch between the perimeter walls and the MgO to allow for expansion.

After installing the initial sheet of MgO flooring, apply a generous amount of Select Construction Adhesive, or equal, to the exposed edge of the installed sheet of MgO. Install the next sheet of flooring butting joints together tightly. Squeeze a small amount of well-bonding construction adhesive the surface along the entire seam. Use a putty knife to remove excess from the butt joint. After installation of first board, verify the board is level before continuing.
 

Packaging & Shipping

Product packaging:                                           Lead time and payment terms:

cartons+wooden pallet or as per                                            The order will be shipped within 15
customer'srequest. The neutral                                              days after confirmation
carton packing or inbulk.                                                       Terms of payment: T/T, 30% deposit,
                                                                                                                          the remaining 70% will be paid before 
                                                                                           shipment